• Eğer varsa, lütfen ekranda gördüğünüz hata mesajını kopyalayın/yapıştırın.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Lütfen ne yapmak istediğini, ne yaptığını ve ne olduğunu açıkla.

• Hangi browseri kullaniyorsun?

• Lütfen görüntülenen metni kendi diliniz yerine İngilizce olarak kopyalayın/yapıştırın. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Bu metin çeviri sisteminde mevcut mu? Evet ise 24 saatten fazla bir süredir tercüme edildi mi?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?

• Lütfen önerinizi tam ve net olarak açıklayın, böylece ne demek istediğinizi mümkün olduğunca kolay anlayabiliriz.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?

• Engellendiğinizde ekranda ne belirdi (Boş ekran? Oyun arayüzünün bir parçası mı? Hata mesajı?)

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?

• Kuralların hangi kısmına BGA adaptasyonu tarafından saygı gösterilmedi

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Kural ihlali oyun tekrarında görünür mü? Eğer evet ise, hangi hareket numarası?

• Hangi browseri kullaniyorsun?

• Hangi oyun aksiyonu yapmak istedin?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Bu oyun eylemini tetiklemek için ne yapmaya çalışıyorsun?

• Bunu yapmaya çalıştığınızda ne oldu (hata mesajı, oyun durum çubuğu mesajı, ...)?

• Hangi browseri kullaniyorsun?

• Oyunun hangi aşamasında sorun oluştu (mevcut oyun talimatı neydi)?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Oyunda bu hamleyi yapmaya çalıştığınızda ne oldu (hata mesajı, oyun durum çubuğu mesajı, ...)?

• Hangi browseri kullaniyorsun?

• Lütfen görüntü sorununu açıklayın. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?

• Lütfen görüntülenen metni kendi diliniz yerine İngilizce olarak kopyalayın/yapıştırın. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Bu metin çeviri sisteminde mevcut mu? Evet ise 24 saatten fazla bir süredir tercüme edildi mi?

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?

• Lütfen önerinizi tam ve net olarak açıklayın, böylece ne demek istediğinizi mümkün olduğunca kolay anlayabiliriz.

I looked at a bug report and saw that it was non-bug due a lack of knowledge about one of the tiles.

Problem is that with this implementation, it's not obvious which tiles have been placed and it is therefore not obvious which tiles we should lookup in the rules before playing...

The implementation already tells us where quests will appear on the next round but that is not all the relevant information on the setup card.

So it would be nice to be able to see that setup card. Possibly with it only showing the parts that are applicable to the number of players in the game.

Alternatively, or in addition to that, the descriptive in the game options could (and IMO should) list those tiles.

Currently, when selecting hard mode when creating the game, I just see a short:
La mise en place avancée modifie la mise en place normale en ajoutant un nouveau lieu et un nouveau combat.

This could contain much more information:
- list explicitly the added cities and (compared to easy mode or to normal mode but I think I would prefer to easy mode)
-- and put in parenthesis the location number and tile so people can look it up in the rules
- list added combats options (Silver Fleet, Golden Mine) also with the relevant tiles code in ()
...
And maybe even add explicitly that players should lookup those tiles in the rules before playing.

This serves two purposes:
- might reduced the risk of non-bug reports
- will help those who don't own the game to choose between the different scenarios.

• Hangi browseri kullaniyorsun?