• Eğer varsa, lütfen ekranda gördüğünüz hata mesajını kopyalayın/yapıştırın.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Lütfen ne yapmak istediğini, ne yaptığını ve ne olduğunu açıkla.

• Hangi browseri kullaniyorsun?

• Lütfen görüntülenen metni kendi diliniz yerine İngilizce olarak kopyalayın/yapıştırın. Bu hatanın bir ekran görüntüsüne sahipseniz (iyi uygulama), onu yüklemek ve bağlantıyı buraya kopyalamak / yapıştırmak için Imgur.com kullanabilirsiniz.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Bu metin çeviri sisteminde mevcut mu? Evet ise 24 saatten fazla bir süredir tercüme edildi mi?

• Hangi browseri kullaniyorsun?

• Lütfen önerinizi tam ve net olarak açıklayın, böylece ne demek istediğinizi mümkün olduğunca kolay anlayabiliriz.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Hangi browseri kullaniyorsun?

• Engellendiğinizde ekranda ne belirdi (Boş ekran? Oyun arayüzünün bir parçası mı? Hata mesajı?)

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Hangi browseri kullaniyorsun?

• Kuralların hangi kısmına BGA adaptasyonu tarafından saygı gösterilmedi

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Kural ihlali oyun tekrarında görünür mü? Eğer evet ise, hangi hareket numarası?

• Hangi browseri kullaniyorsun?

• Hangi oyun aksiyonu yapmak istedin?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Bu oyun eylemini tetiklemek için ne yapmaya çalışıyorsun?

• Bunu yapmaya çalıştığınızda ne oldu (hata mesajı, oyun durum çubuğu mesajı, ...)?

• Hangi browseri kullaniyorsun?

• Oyunun hangi aşamasında sorun oluştu (mevcut oyun talimatı neydi)?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Oyunda bu hamleyi yapmaya çalıştığınızda ne oldu (hata mesajı, oyun durum çubuğu mesajı, ...)?

• Hangi browseri kullaniyorsun?

• Lütfen görüntü sorununu açıklayın. Bu hatanın bir ekran görüntüsüne sahipseniz (iyi uygulama), onu yüklemek ve bağlantıyı buraya kopyalamak / yapıştırmak için Imgur.com kullanabilirsiniz.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Hangi browseri kullaniyorsun?

• Lütfen görüntülenen metni kendi diliniz yerine İngilizce olarak kopyalayın/yapıştırın. Bu hatanın bir ekran görüntüsüne sahipseniz (iyi uygulama), onu yüklemek ve bağlantıyı buraya kopyalamak / yapıştırmak için Imgur.com kullanabilirsiniz.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Bu metin çeviri sisteminde mevcut mu? Evet ise 24 saatten fazla bir süredir tercüme edildi mi?

• Hangi browseri kullaniyorsun?

• Lütfen önerinizi tam ve net olarak açıklayın, böylece ne demek istediğinizi mümkün olduğunca kolay anlayabiliriz.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Hangi browseri kullaniyorsun?